Table of Contents
Advertisement
11.2 VALVE TRAIN ASSEMBLY
Remove one of the main doors, see "DOOR REMOVAL
/ INSTALLATION" section. Remove the media tray, see
"BURNER REMOVAL" section. Remove the fourteen
screws from the valve train assembly. See "VALVE
REMOVAL" section.
11.3 VALVE REMOVAL
Carefully lift the valve train assembly and turn
A.
off the manual shut-off valve, see "VALVE
TRAIN ASSEMBLY" and "GAS INSTALLATION"
section.
NOTE: A new gasket may be required,
when re-installing the valve train assembly,
contact your local Authorized dealer /
distributor.
Disconnect the fl ex connector from the valve.
Remove the valve wire connections, labeling
each one to aid with re-connection.
Remove the four screws from the valve bracket
B.
and remove the valve.
Replace all components before returning the
C.
appliance to service.
Check for gas leaks by brushing on a soap and
D.
water solution.
S C
R E
W S
G A S K
E T
V A L V E
V A L V E
B R A C
51
K E T
W415-0839 / C / 02.03.12
Advertisement
Table of Contents
