Philips TW-RQ1050 Manual page 14

English
14
Cleaning the trimmer with the brush supplied
Clean the trimmer every time you have used it.
1 Switch off the shaver.
2 Press the trimmer slide forwards to slide out the trimmer (Fig. 25).
3 Clean the trimmer with the short-bristled side of the brush
supplied. Brush up and down along the trimmer teeth. (Fig. 31)
4 Switch the shaver on and off and repeat step 3.
5 Press the trimmer slide backwards to retract the trimmer.
Tip: For optimal trimmer performance, lubricate the trimmer teeth with a
drop of sewing machine oil every six months.
storage
There are two ways to store the shaver or to take it with you when you
travel:
- put the shaver in the Power Pod. Make sure the protection cap is not
on the shaving unit.
- slide the protection cap onto the shaving unit to prevent damage to
the shaving heads (Fig. 32).
Replacement
Replace the shaving unit when the shaving unit symbol appears on the
display. Replace a damaged shaving unit right away.
For maximum shaving performance, we advise you to replace the shaving
unit every two years.
Only replace the shaving unit with an original RQ10 Philips
arcitec Shaving Unit.
1 Pull the old shaving unit off the shaver (Fig. 24).
2 Insert the lug of the new shaving unit into the slot in the top of the
shaver (1). Then press the shaving unit downwards (2) to attach it
to the shaver ('click') (Fig. 26).