Philips TW-RQ1050 Manual page 10

English
10
Note: The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look
different but show the same indication.
Replace shaving unit
For maximum shaving performance, we advise you to replace the shaving
unit every two years.
- To remind you to replace the shaving unit, the shaving unit symbol
flashes (all types) and you hear a beep when you switch off the
shaver (RQ1090 only). This happens at the end of 7 successive shaves
to remind you to replace the shaving unit. (Fig. 17)
Note: The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look
different but show the same indication.
travel lock
You can lock the shaver when you are going to travel. The travel lock
prevents the shaver from being switched on by accident.
activating the travel lock
1 Press the on/off button for 3 seconds to enter the travel lock
mode (Fig. 18).
The lock symbol appears on the display (all types) and you hear a
,
beep (RQ1090 only) to indicate that the travel lock has been
activated.
Note: The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look
different but show the same indication.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The motor starts running to indicate that the travel lock has been
,
deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in Power Pod, the travel lock
is automatically deactivated.