Working With Patches; Patch Operations; Patch Initialization (Factory Reset) - Zoom R24 User Manual

Working with patches

After making many changes, you can restore a patch to its pre-edited settings by
initializing it. This will return it to its factory preset condition.

Patch operations

For both insert and send return effects
Patch operation menu
Selecting insert effect/reverb
To use an insert effect, select an algorithm and
a patch.
To use a send reverb effect, select a patch.
(Reference:
Operation Manual
Editing patches (EDIT)
By adjusting effect module parameters and
levels, you can create the desired result. (Refer-
ence: )
Operation Manual
Importing patches (IMPORT)
All effect algorithms (and reverb patches) or
a single one can be imported from a selected
project on the R24.
(Reference: Operation Manual )
In audio interface mode, one complete set of effect
data is saved for the mode. There are no project
based settings.
Saving patches (SAVE)
Edited patches can be saved.
(Reference: Operation Manual )
Initializing patches (INITIAL)
Restores patches to their original factory set-
tings (only available in audio interface mode).
Changing patch names (RENAME)
The name of the currently selected patch can
be changed.
patches
)

Patch initialization (factory reset)

EFFECT > INITIAL
1
Press EFFECT.
Turning effects on/off
Insert effect
Press the
Send return effect
Press the
The following example is of an insert
effect.
2
Turn the effect
3
INITIAL
Select
Press ENTER.
4
YES
Select .
Press ENTER.
beneath .
beneath .
On .
Change
.
Change
menu
Change
menu
28