Control Surface Setup For Other Daws; Logic - Zoom R24 User Manual

Control surface setup for other DAWs

You can set up the R24 as a controller for use with a variety of DAW software besides
Cubase LE 5. Please refer to the manual for the software that you are using.

Logic

Control surface setup
1
Select "Preferences" >
"Control surfaces" > "Setup..."
from the "Logic Pro" menu.
This opens the "Setup" window.
2
Click on the top left "New" and
select "Install" from the pull-down
menu.
3
Select "Mackie Designs/Mackie
Control/Logic Control" from the list
in the "Install" window and click
the "Add" button.
"Mackie Control" will be added to
the setup window.
4
Click the "Mackie Control" icon.
Then, from the top of the list at the
left set "Out Port" and "Input" to
"ZOOM R16_R24" using their pull-
down menus.
29
Function key setup
1
Select "Preferences" >
"Control surface" > "Controller
Assignments..." from the "Logic
Pro" menu.
This opens the "Controller
Assignments" window.
2
From the "Zone" column select
"Control Surface: Mackie Control."
3
Change the functions as you like.
Controls F1~F5 correspond to the
F1~F5 keys on the R24.
The above procedures are for Logic
Pro 9.
The names of the menus, for
example, might be different in a
different version of Logic.
Please refer to the manual for the
version of Logic that you are using
for details.