Connecting And Disconnecting In Audio Interface Mode; Connecting The R24 To A Computer For The First Time; R24 Setup And Connection - Zoom R24 User Manual

Connecting and disconnecting in audio interface mode

This is an overview of connecting and disconnecting the R24 to a computer with a USB
cable. For details, see the included Cubase LE 5 Startup Guide guide.
Connecting the R24 to a computer
for the first time
1
Install the Cubase LE 5 DAW
software on the computer.
2
Install the audio driver on the
computer from the included
CD-ROM.
Installation and setup details
☞
Reference: "Cubase LE 5 Startup Guide"
4
Connect the R24 to a computer.

R24 setup and connection

5
Setup the DAW software.
☞
Reference: "Cubase LE 5 Startup Guide"
Control surface setup
NOTE
• The ZOOM R16/R24 audio driver is essential for
using the R24 as an audio interface with DAW
software such as Cubase LE 5.
When downloading it, follow the included instal-
lation guide to install it correctly.
• Download the latest R24 audio driver from the
Zoom Corporation website.
http://www.zoom.co.jp/
7
Device setup
P.9
Mackie Control
R24 setup and connection
Follow these procedures when connecting again.
1
Press USB.
2
Select AUDIO I/F.
Press ENTER.
3
Select EXECUTE.
Press ENTER.
Change
menu
Change
menu