Table of Contents
Advertisement
4. Remove the screws fastening the hob
and the plates corresponding to each
burner zone.
Where the UR burner is present,
the nut that fixes the thermocouple
to the hob top must be unscrewed
(CH8).
Under the plates, there may be a
number of seals, together with the
igniter and thermocouple. Pay
attention.
Installation
5. Unscrew the 6 screws that hold the glass
hob top to the casing (see the figures
below for their location).
(seen from below)
65 cm
75 cm
90 cm
93
Advertisement
Table of Contents
