Smeg PM6721WLDR Manual page 27

Demo mode (for showrooms only)
This mode allows the appliance to
deactivate all heating elements,
while keeping the control panel
active.
To activate demo mode:
1. Make sure that the appliance has been
disconnected from the mains power
supply for at least 10 -15 seconds.
2. Connect the appliance to the mains
power supply.
3. Within 2 minutes, press the controls lock
key and the pause key
simultaneously for a few seconds until
you hear an acoustic signal.
4. Simultaneously place a finger on the left-
hand side and right-hand side scroll bars
of the cooking zone closest to the
general controls area.
An acoustic signal is emitted and
will appear on the display above the
general controls area.
Use
5. Press the pause key
appears on the display above the
general controls area.
displayed on the left hand scroll bar.
6. Place a finger on the top part of the left-
hand side scroll bar until
displayed.
7. Press the controls lock key
pause key
seconds.
8. Press and hold down the On/Off key
for at least 1 second in order to switch on
the appliance in demo mode.
If the demo mode is enabled,
when the appliance is switched on
seconds in the area above the
general controls area and
appear on the scroll bars.
until
will be
is
and the
simultaneously for a few
will appear for a few
will
79