Yamaha RX-A2080BL Owner's Manual page 62

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY
PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
ENTER
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU /MENU / / MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING
4
Perform the angle/height measurement.
1
Attach the supplied pole to the center of the microphone base.
Pole
Microphone base
2
Place the microphone base at the listening position you will be
seated most frequently and set the YPAO microphone to the
position "1".
Y
• We recommend using a tripod to place the microphone base at ear height.
Use the tripod screws to fix the microphone base in place.
• Do not move the microphone base until the fourth angle measurement
finishes.
3
4
5
Microphone
base
62
En
Press ENTER to start the first angle measurement.
The following screen appears on the TV when the first angle
measurement finishes.
In the same way, perform the angle measurement for the
positions "2" and "3".
Set the YPAO microphone at the top of the pole and perform the
fourth angle measurement.
The following screen appears on the TV when the fourth angle
measurement finishes.