Yamaha RX-A2080BL Owner's Manual page 154

■ Input Rename (Manual)
Allows the input source names displayed on the front display to be set manually.
Input sources
AV 1-7, AUX, AUDIO 1-4*, PHONO, TUNER, MusicCast Link, SERVER, NET RADIO, Bluetooth, USB
* AUDIO 4: RX-A3080 only
■ Procedure
1
Use the cursor keys to select an input source to be renamed.
2
Press ENTER.
The cursor moves to the name edit screen.
3
Use the cursor keys and ENTER key to edit the name, and then select "SAVE" and press ENTER.
X
• To cancel the entry, select "CLEAR".
• If you select "RESET", the default input name will be inserted into the editing area.
4
To change another input source name, repeat steps 1 to 3.
5
Press SETUP.
■ Auto Play
Enables/disables Auto Play function in Internet streaming services and following input
sources.
Input sources
(network sources), SERVER, NET RADIO, Bluetooth, USB
Settings
Off Disables Auto Play function.
On Starts automatically to play back the last content which you played back.
Starts automatically to play back the content which only you played back at
Auto
setting the unit to standby mode.
Y
In some input sources or content, you might not enable Auto Play function.
X
With some input sources, "Auto" cannot be selected.
■ DSP Skip
Set which sound programs are skipped when operating the PROGRAM key.You can select the
desired sound program quickly by using this function.
Settings
Off Does not skip the selected sound program.
On Skips the selected sound program.
■ Remote Key
Configures the Remote Key settings.
PROGRAM Key
Sets the function that is assigned to the PROGRAM key on the remote control. You can use the
PROGRAM key for other than DSP program selection.
Settings
Assign 1 Enables selecting the DSP Programs.
Enables selecting just the DSP Movie/Music Programs.
Assign 2 The up key of the PROGRAM keys: toggle between the Movie Programs.
The down key of the PROGRAM keys: toggle between the Music Programs
Assign 3 Enables selecting the NETWORK sources.
Assign 4 Enables moving to the previous/next page of the Browse Screen.
Assign 5 Enables fine-adjusting the subwoofer volume.
Assign 6 Enables adjusting the volume of dialogue sounds.
Enables selecting shuffle/repeat settings.
Assign 7 The up key of the PROGRAM keys: repeat
The down key of the PROGRAM keys: shuffle
Displays the front/on-screen display information.
Assign 8 The up key of the PROGRAM keys: front display information
The down key of the PROGRAM keys: on-screen display information
X
This setting does not change the function of the PROGRAM key on the front panel.
154
En