Recalling Recorded Registrations (And Bulk Data); Replacing Registrations - Yamaha Electone EL-900 Owner's Manual

5 Recalling Recorded
Registrations (and Bulk Data)
The registrations (and bulk data) recorded to song numbers
in the above operation can be loaded back to the Electone by
simply selecting the appropriate song number and pressing
the PLAY button. When the operation has been completed,
the M.D.R. returns to STOP status.
The M.D.R. also makes it possible to use more than the 16
Registration Memory registrations in a performanceﾑwithout
having to alter the current panel settings. This would come
in handy when performing several songs in succession that
use more than 16 registrations.
To do this:
1
First record the registrations you need into several
song numbers on the M.D.R. before the performance.
(You should also try to record them in the order that
youﾕll use them, if possible.)
2
During the performance, after all 16 registrations from
a certain song number have been used, select the next
song number and press the PLAY button on the
M.D.R. This replaces all 16 registrations in
Registration Memory with the new ones from the
selected song number.
3
By repeating the above steps, you can run through an
entire performance without having to change the panel
settings.

6 Replacing Registrations

The M.D.R. also lets you change the registrations of an existing
song without changing the performance data.
The procedure is the same as that of Recording Registrations
mentioned in the previous page.
NOTE:
Selecting the Next Song in the User Registration Shift
settings makes it possible to have the M.D.R.
automatically read the 16 registrations in the next song
number. See page 83 for more information.
7
97