Saving Your New Voice - Yamaha Electone EL-900 Owner's Manual

You have got the full-bodied ringing electronic piano sounds.

2 Saving Your New Voice

Once you have created a sound you are satisfied with, youﾕll want to
save that sound for future use.
To save your newly created voice:
1
Use the Page buttons to select the SAVE page.
The following display appears.
SAVE Page
2
Press the Data Control button that corresponds to the User voice
number you wish to save to.
The following display appears, prompting confirmation of the
operation. (Saving a new voice automatically erases the voice
previously stored to the selected User number.)
NOTE:
The Operator on/off settings you made
here are temporary. Even though you turn
off an Operator when editing a voice, the
on/off status of the Operators will forcibly
be changed and saved as ﾒonﾓ in a User
voice.
If you want an Operator muted, set the OL
parameter of the selected Operator to the
minimum.
NOTE:
After making changes in the voice, you can
restore the original voice by switching to
another function. If, however, you wish
to keep the newly created voice for future
use, you should save it. (See following
section.)
NOTE:
The on/off status cannot be saved. If you
want an Operator muted, set the OL
parameter of the selected Operator to the
minimum.
PAGE
8
115