Recalling Recorded Registrations (And Bulk Data); Replacing Registrations - Yamaha Electone EL-27 Owner's Manual

Recalling Recorded Registrations (and Bulk Data)

The registrations (and bulk data) recorded to song numbers in the above operation can be loaded back to
the Electone by simply selecting the appropriate song number and pressing the PLAY button. When the
operation has been completed, the M.D.R. returns to STOP status.
The M.D.R. also makes it possible to use more than the 5 Registration Memory registrations in a
performance – without having to alter the current panel settings. This would come in handy when
performing several songs in succession that use more than 5 registrations.
To do this:
1.
First record the registrations you need
into several song numbers on the M.D.R.
before the performance. (You should also
try to record them in the order that you'll
use them, if possible.)
2.
During the performance, after all 5
registrations from a certain song number
have been used, select the next song
number and press the PLAY button on the
M.D.R. This replaces all 5 registrations in
Registration Memory with the new ones
from the selected song number.
3.
By repeating the above steps, you can
run through an entire performance without
having to change the panel settings.

Replacing Registrations

The M.D.R. also lets you change the registrations of an existing song without changing the performance
data.
The procedure is the same as that of Recording Registrations mentioned in the previous page.
64