Yamaha Electone EL-900 Owner's Manual page 150

NOTE:
When you are playing the rhythm
sequence that is made up of several
sequences (SEQ. buttons), pressing the
Left Footswitch turns off the currently
played-back rhythm sequence and
pressing it again starts the next sequence.
NOTE:
When loading your original Rhythm
Program data back to the Electone, be
sure to stop the rhythm if it is playing.
Loading cannot be executed when a
rhythm is running.
9
150
To start the sequence using the Left Footswitch:
1
Select STOP from the RHYTHM CONTROL (page 152) on the
FOOTSWITCH-LEFT display.
2
Press the Left Footswitch with your right foot to turn the sequence
on. Pressing the Left Footswitch again in the middle of the sequence
playback cancels the rhythm sequence function.
Saving Rhythm Pattern and Rhythm Sequence Data to Disk:
Once you have created your own rhythms and rhythm sequences, youﾕll
want to save them to disk. Doing so allows you to free up memory in the
Electone for creating additional rhythms and sequences. Also, the User
rhythms and sequences youﾕve saved to disk can be loaded back to the
Electone any time.
Rhythm Pattern and Rhythm Sequence data are included in the bulk data
that is saved when you record registrations to disk. Refer to the section
Recording Registrations, page 96, for instructions.
Loading Rhythm Pattern and Rhythm Sequence Data from Disk:
The Rhythm Pattern and Rhythm Sequence data saved to disk as a part of
bulk data, can instantly be loaded back to the Electone. Refer to the section
Recalling Recorded Registrations, page 97, for instructions.