Flute Voices (Organ Sounds); Creating Flute Voices - Yamaha Electone EL-500 Owner's Manual

3

Flute Voices (Organ Sounds)

The Flute Voice feature allows you to create your own organ voices, giving you access to an unlimited
combination of organ sounds. With this function, you can recreate all of the classic organ sounds by
adjusting the flute footage levels and the percussive sounds, just like on conventional organs.
There are eight flute footage settings, with three additional footage settings for the attack sound. You can
select various Preset Flute Voices, or create your own and save those to User Voices.
There are five pages: Menu, Footage, Attack, Volume, Save.
1

Creating Flute Voices

To create the Flute Voices:
1
Press one of the Flute Voice buttons (UPPER or LOWER) in the
DISPLAY SELECT section.
The FOOTAGE page appears on the LCD and the LED above the
button lights.
FOOTAGE
2
Use the Data Control buttons directly under the flute footage
numbers to change each footage volume.
Play the keyboard and listen to the changes in the sound as you
adjust the footage volumes.
Pressing the button again turns the Flute
Voice function off (the LED also turns
off), and changes the LCD to the Voice
Display. Each of the buttons acts as an
on/off switch.
The total volume of the all footages are
set on the VOL. page below.
37
- EL-700 only
A. B. C.
VOICE EFFECT
DISPLAY SET M. O. C.
FOOT REGIST. EXP.
SW. SHIFT PITCH/MIDI
RHYTHM
VOICE PROGRAM
EDIT PATTERN SEQUENCE
U. FLUTE L. FLUTE TREMOLO
VOICE VOICE (FAST)
DISPLAY SELECT
EL-700
NOTE:
NOTE:
3