Table of Contents
Advertisement
Operation with a router
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings
System
De-registering a repeater
¤
. . . use
OK
. . . use
Operation with a router
When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 does not sufficiently suppress the occurring echoes: activate XES mode 2.
¤
OK Normal mode
OK XES mode 1
OK XES mode 2
If there are no problems with echoes, the normal mode (factory settings) should be
activated.
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode
OK
Setting the flash time
¤
. . . use
. . . possible flash times are listed
48
Repeater
to select
Settings
to select repeater
to select
Settings
. . . use
to select Tone or Pulse
to select
Settings
. . . use
Press and hold the Registration/paging
OK
System
De-reg.
Yes
. . . press one of the following keys
OK
Telephony
Select (
OK
Telephony
to select flash time
OK
Repeater
OK
Dialling
= selected)
OK
Recall
Select (
= selected)
OK
Advertisement
Table of Contents
