Before Use
Disassembling/Assembling attachments
The following steps show how to disassemble/assemble attachments, using the juice
●
■
attachment as an example.
The frozen attachment can be disassembled/assembled in the same method.
To disassemble
1
Remove the
juicing bowl
from the motor
housing.
2
Remove the juice
attachment.
Squeezing screw comes out with it.
●
■
Squeezing
screw
3
Remove the parts.
Filter
Rotating
brush
EN12
-Disassembly and assembly of the parts-
(
)
Frozen
attachment
(
)
Frozen
attachment
1
Make sure the gasket, rubber
plug and rubber brushes are
in place correctly.
Gasket is located in the juicing bowl.
●
■
Top view
Rubber plug is located outer bottom.
●
■
Outer bottom view
Rubber brushes are located on side of
●
■
the rotating brush.
See page EN19 for how to install the
gasket, rubber plug and rubber brushes.
The juicer may not work properly if they
●
■
are not assembled correctly.
Push it in until
no gap.