3 BASIC COPY MODES
Before Using Copying Functions
Default settings
This equipment is under its "default settings" when the power is turned ON, namely, if no setting change has been applied
yet, the equipment's settings return to the default ones when the energy saving mode is cleared or the [FUNCTION
CLEAR] button on the control panel is pressed. The default settings for basic copy modes at installation are shown below.
Reproduction ratio
Copy quantity
Paper selection
Simplex/Duplex
Density adjustment
Original mode
Finishing mode
Feeding mode when using the RADF (optional)
The default settings are changeable. For details, refer to the MFP Management Guide.
Confirming the set functions
If you press [SETTINGS] on the touch panel, the menu shown below is displayed. On this menu, you can view the
functions that are currently set.
Switching to the function setting menu
To change the functions on the current menu, press the corresponding buttons. The desired setting menu will then appear.
52
Before Using Copying Functions
Item
Default setting
100%
1
Automatic Paper Selection (APS)
1-sided original -> 1-sided copy
Automatic adjustment
TEXT/PHOTO
When using the original glass:
NON-SORT NON-STAPLE
When using the RADF (Reversing Automatic Document Feeder,
optional):
SORT
Continuous feed mode