Table of Contents
Advertisement
Battery
Charging
Before using the battery, fully charge it in the AC
adapter.
We recommend that you keep a spare battery with you
whenever you use the battery to run the camera-
recorder.
1
Align the battery with the "
adapter, place it flat, and slide it in the direction
shown below.
• You cannot charge the battery if the DC cord is
connected to the DC OUT connector, so discon-
nect it first.
2
Connect the AC cord to the power outlet.
• The POWER lamp and CHARGE lamp on the AC
adapter light, and charging begins.
• If the CHARGE lamp does not light when the bat-
tery is placed in the AC adapter, remove the bat-
tery and place it in the adapter once again.
CHARGE
POWER
3
When the battery has been charged, the CHARGE
lamp on the AC adapter goes off.
4
Slide the battery, and remove it.
20
Recording time of accessory battery
" marking on the AC
• Times given above are approximations only.
• The times given above apply when the ambient operating tem-
The figure in parentheses is the time that applies when the
LCD monitor is used.
perature is 68°F (20°C) and ambient humidity is 60%.
Charging may take longer at other temperatures and humidity
levels.
Advertisement
Table of Contents
