Playback Functions Screen - Panasonic AG-DVC60P Operating Instructions Manual

PLAYBACK FUNCTIONS screen

Item/
(Display Description of settings
mode)
SEARCH Use this to set the operation to be performed
(VCR) when an INDEX button (i or u) on the
remote control unit is pressed.
PHOTO:
A photo search is conducted. (P47)
SCENE:
An index search is conducted. (P47)
32K (12bit) Use this to set the sound to be output as CH1
AUDIO and CH2 signals when playing back a tape
(VCR) that was recorded in the 32K (12-bit) audio
mode.
ST1:
This selects the sound that was recorded
during shooting.
CH1 signals = CH1 track
CH2 signals = CH2 track
ST2:
This selects the sound that was dubbed
on the recording.
CH1 signals = CH3 track
CH2 signals = CH4 track
MIX:
This mixes the sound that was recorded
during shooting and the sound that was
dubbed on the recording.
CH1 signals = CH1 + CH3 tracks
CH2 signals = CH2 + CH4 tracks
<Note>
When sound is recorded in the 48K (16-bit)
audio mode, CH3 and CH4 do not exist so
the following always stands:
CH1 signals = CH1 track
CH2 signals = CH2 track
32K (12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from the
AUDIO IN/OUT jack
Audio recording
mode
32K (12-bit)
48K (16-bit)
32K (12bit) AUDIO
item setting
ST1
ST2
MIX
––––
Item/
(Display
mode)
AUDIO OUT Use this to set the audio signals to be output
(VCR) from the AV IN/OUT jack when the tape is
played back.
CH1•CH2:
CH1 output = CH1 signals
CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals
CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals
CH2 output = CH2 signals
The underlining indicates the factory setting.
AUDIO OUT AUDIO IN/OUT jack
item setting CH1 output
CH1•CH2 CH1
CH1 CH1
CH2 CH2
CH1•CH2 CH3
CH1 CH3
CH2 CH4
–––– CH1+CH3
CH1•CH2 CH1
CH1 CH1
CH2 CH2
Description of settings
AUDIO IN/OUT jack
CH2 output
CH2
CH1
CH2
CH4
CH3
CH4
CH2+CH4
CH2
CH1
CH2
67