Display - Yamaha CDR1000 Owner's Manual

8
Chapter 2—Touring the CDR1000

Display

P
O
A TRACK counter
The track counter displays the selected track number.
B
INDEX counter
The index counter displays the selected index number.
C
ELAPSE, REMAIN & TOTAL indicators
These indicators show the selected time display mode. See "Setting the Time Display"
on page 19 for more information.
D
Time counter
These four digits display the playback and recording time in minutes and seconds.
E
Disk type indicator
These indicators show the type and status of the loaded disc. See "Disc Type & Status"
on page 18 for more information.
F
PLAY (
This indicator lights up during playback and recording, and flashes during finalization,
erasure, and PMA writing.
G
ANALOG, AES/EBU & COAX indicators
These indicators show the selected input source. See "Selecting the Input Source" on
page 25 for more information.
H
LOCK indicator
This indicator shows whether or not the CDR1000 is locked to the selected digital input
source. See "Selecting the Input Source" on page 25 for more information.
I
SRC indicator
The SRC (sampling rate converter) indicator lights up when the CDR1000's built-in
sampling rate converter is active during recording. See "Setting the Sampling Rate Con-
verter" on page 26 for more information.
J
COPY indicators
These indicators show the Copy Bit setting. See "Setting the Copy Bit" on page 28 for
more information.
CDR1000—Owner's Manual
1 2 3 4
TRACK INDEX M
ELAPSE
8 8 8 8
8 8 8 8
REMAIN
TOTAL
C D R 1 0 0 0
L
dB –60 –50 –40 –32 –24 –18 –14 –12 –10 –8 –6
R
) indicator
5 6 7
S ANALOG AES/EBU COAX
CD-RW LOCK SRC
REC COPY10
SYNC-REC 1 ALL
REPEAT A B 1 ALL
–4 –3 –2 –1 CLIP
NM
8
9
J
K
L