Function Buttons - Yamaha CDR1000 Owner's Manual

K
SYNC-REC indicators
These indicators are used with the Sync Recording functions. See "Sync Recording from
CD, MD, or DAT" on page 39 for more information.
L
REPEAT indicators
These indicators are used with the Repeat Playback functions. See "Using Repeat Play-
back" on page 24 for more information.
M PAUSE ( ) indicator
This indicator lights up when playback is paused or in Record Standby mode.
N
REC indicator
This indicator flashes in Record Standby mode and lights up continuously while
recording.
O
L & R level meters
These 16-segment meters, with peak hold, display playback and recording levels from
–60 dB through to –1 dB, and CLIP. See "Metering & Peak Hold" on page 20 for more
information.
P
Message area
This 12-character message area displays the status and operating mode of the CDR1000
and Utility function parameters.

Function Buttons

A
PEAK HOLD button & indicator
This button is used to turn on and off the Peak Hold function. The PEAK HOLD indi-
cator lights up when the Peak Hold function is on. See "Metering & Peak Hold" on page
20 for more information.
B
TIME DISPLAY button
This button is used to select the time display mode: ELAPSE, REMAIN, or TOTAL. The
selected mode is indicated on the display. See "Setting the Time Display" on page 19 for
more information.
C
INPUT SELECT button
This button is used to select the input source: ANALOG, AES/EBU, or COAXIAL. The
selected input source is indicated on the display. See "Selecting the Input Source" on
page 25 for more information.
1 2 3 4
PEAK TIME INPUT
HOLD DISPLAY SELECT UTILITY
REC
MUTE UV22 REPEAT A-B
SYNC INDEX TRACK
REC AUTO INC INC
5 6 7 8 9 J K L
Function Buttons
CDR1000—Owner's Manual
9