Listening To Radio Broadcasts - Sherwood R-672 Operating Instructions Manual

R-672(A) 2007.6.15 10:17 AM 페이지 26

LISTENING TO RADIO BROADCASTS

Auto tuning
1.
Select the desired band.
• Each time this button is pressed, the band changes as
follows:
→ FM ST → FM MONO → AM → XM
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound.
• To listen to XM Satellite Radio, select XM mode.
(For details, refer to "XM Satellite Radio (only for
North America)" on page 28.)
Manual tuning
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING UP(+)
/ DOWN(-) buttons or the SELECT
buttons repeatedly until the right frequency has been
reached.
2.
• The tuner will now search until a station of sufficient
• If the station found is not the desired one, simply repeat
• Weak stations are skipped during auto tuning.
Auto presetting
• Auto presetting function automatically searches for FM
• While listening to radio broadcasts, press and hold
UP(▶) / DOWN(◀)
• Then "AUTO MEM" flickers and this receiver starts auto
• Up to 30 FM stations can be stored.
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, preform
• In the XM mode, auto presetting doesn't work.
26
Press the TUNING UP(+)/DOWN(-) buttons or the
SELECT UP(▶) / DOWN(◀) buttons for more than
0.5 second.
strength has been found. The display shows the tuned
frequency and "TUNED".
this operation.
stations only and store them in the memory.
down the (MEMORY/)ENTER button for more than 2
seconds.
presetting.
Notes:
"Manual presetting" procedure with using "Manual
tuning" operation.