Optional Components; Functional Overview - Xerox 128 Operator's Manual

System components

Optional Components

Functional overview

2- 2
• Inverter Feeder/Stacker and up to 3 Feeder/Stackers
• 2-Tray Interposer and Finisher (Production publisher
configuration)
NOTE: The initial release of the Production publisher (Interposer
and Finisher) configuration is 180 PPM only and does not support
LCDS & IPDS.
The Xerox DocuTech HLC prints high quality, high resolution
documents in simplex or duplex mode at high production speeds,
from LCDS, PostScript, PCL, and other data streams. The system
can switch between printing different types of data streams
without a need for rebooting or reconfiguring software.
The printer supports:
• Duplex printing
• Media handling of multiple weights, sizes, and types
• Optional modules for enhanced finishing and output to third-
party finishing devices
• Optional enabling of a third-party roll feeder
• Depending on your configuration: optional high-capacity
feeder/stacker modules, which provide additional feeder trays
and output bins
• Depending on your configuration: Interposer/Finisher/Binder
• High resolution of LCDS*, PostScript, and PCL data streams
(shown in the following table)
NOTE: *The initial release of the Production publisher (Interposer
and Finisher) configuration is 180 PPM only and does not support
LCDS & IPDS.
DocuTech 128/155/180 HighLight Color Operator Guide