Philips SBC SC367 Instructions For Use Manual page 3

1
4
5
3
2
1
12
11
2
4
3
5
2
6
1
15
14
6
7
8
9
10
8
9
10
7
11
12
9V DC 9V DC
13
1-1 Microphone -------------------------
1-2 Power light --------------------------
GB
1-3 Transmit light -----------------------
1-4 Talk pushbutton --------------------
1-5 Loudspeaker ------------------------
1-6 Loudspeaker volume control ----
1-7 DC power supply socket --------
1-8 Mode switch ------------------------
MONITOR : baby monitoring mode; microphone is sound activated
OFF : switches off the Baby unit completely
INTERCOM : microphone is activated when TALK pushbutton (1-4) is pressed
1-9 Channel selection switch --------
1-10 Battery compartment cover -----
1-11 AC power adapter ----------------
1-12 Temperature indication -----------
2-1 Microphone -------------------------
2-2 Power light --------------------------
2-3 Link light ----------------------------
2-4 Loudspeaker ------------------------
2-5 Loudspeaker Volume control /
Off switch -------------------------
2-6 Sound-level lights ------------------
2-7 Charging base ----------------------
2-8 Battery compartment cover -----
2-9 Talk pushbutton --------------------
2-10 Channel selection switch --------
2-11 Belt clip ------------------------------
2-12 DC power supply socket --------
2-13 AC power adapter ----------------
2-14 Audible warning switch ----------
2-15 Charging base light ----------------
B
ABY UNIT
high-sensitivity microphone
lights when unit is powered; flashes when batteries are low
lights when a sound is being transmitted
push this button to talk in intercom mode
provides clear sound
set loudspeaker level for talk-back and intercom
plug mains adapter connector into this socket
select channel A or B (whichever has least interference)
unscrew and unclip to insert batteries
plug into AC mains socket and into DC power supply socket
o
approximate baby room temperature in C
P
ARENT UNIT
sensitive talk-back and intercom microphone
lights when unit is powered; flashes when batteries are low
lights to show that both units are in touch with each other
provides clear sound for monitoring and intercom modes
• set loudspeaker level for monitoring and intercom;
• switches off the power to the unit completely
the more sound your baby makes, the more lights that light
place unit in base to operate it on mains power and when batteries
are low
unscrew and unclip to replace batteries
push this button to talk in talk-back and intercom modes
select channel A or B (same as Baby unit)
handy clip for carrying the unit
plug mains adapter connector into this socket
plug into AC mains socket and into DC power supply socket
sets audible link alarm on or off
lights when unit is in the base and charging
2