Showroom Mode - U-Line U-3045WCINT-60B User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Set Points
Up
Down
The Set points menu contains options to modify both the
Zone and Evap set points. Changes to the zone set point
will be reflected on the main screen. Changes to the evap
set point alter the temperature the evaporator needs to
meet during a defrost cycle.
To access Set Points
1. Press to select "Set Points".
2. Press .
3. Press and to scroll through available set points.
To change set points
4. Press , the selected set point will begin to flash.
5. Press or to modify the value.
6. Press to confirm setting.
To exit the Set Points menu, press
Menu" and press to confirm.
Fan Delay
Up
Down
Select
RETURN TO MENU
SET POINTS
ZONE = 3°C
EVAP = 5°C
to select "Return to
Select
RETURN TO MENU
FAN DELAY
FAN DELAY ON = 1
FAN DELAY OFF = 2
The Fan Delay menu option allows the modification of fan
run times during and after a cooling cycle. In order to
allow time for the evaporator to properly cool, the
evaporator fan is delayed from starting with the cooling
cycle for a given amount of time. In order to remove as
much warmth as possible from the cabinet the evaporator
fan will continue to run at the end of the cooling cycle for
a given amount of time.
Fan Delay On=
"Fan Delay On" is the amount of time in minutes the fan
will be delayed from starting from the beginning of a
cooling cycle.
Fan Delay Off=
"Fan Delay Off" is the amount of time in minutes the fan
will continue to run at the end of a cooling cycle.
To access Fan Delay
1. Press to select "Fan Delay".
2. Press .
To change fan delay
3. Press to select either "Fan Delay On" or "Fan Delay
Off" and press . The chosen option will begin to
flash.
4. Press or to change settings.
5. Press to confirm.
To exit Fan Delay, press
and press to confirm.

Showroom Mode

Up
Down
Showroom displays a number of features and allows the
unit to be powered on without running the cooling system.
73
u-line.com
to select "Return to Menu"
Select
RETURN TO MENU
SHOWROOM MODE
OFF
Control Operation - Service 8