U-Line U-3045WCINT-60B User Manual & Service Manual page 72

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Factory Default
Up
Down
Factory Default will restore all settings to their factory
default.
To access Factory Default
1. Press to select "Factory Default".
2. Press .
To restore settings to their factory default.
3. Press to select "Restore?" and press
4. "Restore?" will change to "Restoring..." while settings
are restored. When restoration is complete,
"Restoring..." will return to "Restore?".
To exit Factory Default, press
Menu" and press to confirm.
Re-Select Model
Up
Down
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
Select
RETURN TO MENU
FACTORY DEFAULT
RESTORE?
to select "Return to
Select
RETURN TO MENU
RE-SELECT MODEL #
3018R
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Press to select "Re-Select Model".
2. Press .
To change model setting
3. Press to select "Model=" and press
begin to flash.
4. Press or to scroll through each available model.
5. Press to confirm. While processing, the
momentarily change to
To exit Re-Select Model, press
Menu" and press to confirm. (Power cycling unit is
recommended after re-selecting model.)
Factory Wi-Fi
Up
Down
The Factory Wi-Fi option is only used in manufacturing
and should always be OFF.
1. Press to select "Factory Wi-Fi".
2. Press .
3. Press or select "OFF".
To exit the Factory Wi-Fi menu press
to Menu" and press
72
u-line.com
. "Model" will
*
.
to select "Return to
RETURN TO MENU
FACTORY Wi Fi
OFF
to select "Return
to confirm outputs.
Control Operation - Service 7
will
Select