Sound; Custom Sound Memory—Store The Sound Settings - Panasonic SC-HT800V Operating Instructions Manual

Sound

Sound field system
≥Dolby Digital and DTS are digital encoding
systems used on DVD to carry surround sound.
Both were originally developed for use in
Dolby Digital and
cinemas.
DTS
≥This unit automatically recognizes and decodes
these systems.
Dolby Pro Logic is a decoding system that was
developed to get a better sense of presence from
sources encoded with Dolby Surround. The
Dolby Pro Logic
feeling of position has been improved by the
addition of a separate center speaker channel.
≥This mode adds surround effects to stereo
sources.
MUSIC
≥You can adjust the volume of the surround
speakers to get the best surround effect.
Super
≥This mode adds surround effects to movie
Surround
software that hasn't been recorded with the
MOVIE above systems.
≥You can adjust the volume of the surround
speakers to get the best surround effect.
Use Sound Field Control effects to change quality
Sound Field Control
and add reverberation.
≥You cannot use Dolby Pro Logic, Super Surround, Center Focus, or adjust subwoofer level if you have connected headphones. ("ERROR"
appears on the display.)
≥You may experience a reduction in sound quality when these sound field systems are used with some sources. If this occurs, turn the sound
field system off.
DVD
only
DVD/VCR
DVD VCR
RESET
TV/VIDEO
1
PAGE
GROUP
4
PICTURE MODE/
SETUP
7
REPEAT
PLAY MODE
100
SKIP
TV VOLj TV VOLi
OPEN/CLOSE/EJECT
TOP MENU
NAVI
DIRECT
NAVIGATOR
OSD/DISPLAY
D.RE-MASTER C.S.M
SUBWOOFER SFC
C.S.M
POSITION
SUBTITLE
MEMORY
PROG CANCEL
SLEEP
[SHIFT]
ÎPL
SHIFT
Features
FM/AM REC
TV TUNER
2 3
5 6
8 9
S10/ENTER
0
SLOW/SEARCH
JET REW
MENU
CH
PLAY LIST
ENTER
RETURN
CH
VOLUME
C.FOCUS S.POSITION
SUPER SRND MUTING
ZOOM QUICK REPLAY
SPEED
AUDIO TEST
MIX 2CH CH SELECT
Software
Software encoded with
Dolby Digital can be
identified with this mark.
Software encoded with DTS
can be identified with this mark.
Software encoded with Dolby Surround can
be identified with this mark (DVD, CD, Video
CD, Laser Disc, Video tape).
Any stereo sound source.
Any source.
Custom Sound Memory—Store the
sound settings
[DVD-A] [DVD-V] [VCD] [CD]
Store the sound settings indicated below for a disc so the unit recalls
them the next time you play it.
≥Settings: Dolby Pro Logic, Subwoofer level, Center Focus, Sound
Field Control, Super Surround
≥Number of discs: 30
∫ Store the settings
1
Make the settings.
2
Press and hold [SHIFT]r[C.S.M].
CSM
∫ Recall the settings
The unit recalls the settings when you play the disc again.
≥The settings are replaced if you change them.
≥When you store settings for a 31st disc, the earliest settings
disappear.
≥Press [SHIFT]i[C.S.M] while "CSM" is lit and the settings return to
those that were on before the settings are recalled.
≥Press [SHIFT]i[C.S.M] while "CSM" is out and you are playing a
disc for which you stored settings and those settings are recalled.
Other effects
Center Focus
Seat position
Center Focus
Seat position
—
Seat position
—
RQT6951
49