Changing Audio Quality/Sound Field - Panasonic SC-BT100 Operating Instructions Manual

Changing audio quality/sound field
oThe following sound effects may not be available or have no effect with some sources, or when headphones are used (=_ 14).
oYou may experience a reduction in sound quality when these sound effects are used with some sources. If this occurs, turn the sound effects off.
Using Subwoofer boost
Main unit only
You can enhance the subwoofer effect with strong bass.
Press [SW BOOST] on the main unit.
=The SW BOOST indicator lights when Subwoofer Boost is turned on.
O
O
Setting the sound effects
Press [SOUND].
Press [&, T] and select item for setting.
EQ _ H.BASS _ REAL CF
t
W. S. e SRD ENH< SW. LEVEL
O Press [OK].
This function automatically makes speaker adjustment to enhance the
surround sound effect.
O Press [A, T] to select "ON" or "OFF".
oThis function is effective when playing audio containing surround
channel sound or when Dolby Pro Logic Ilx/Dolby Pro Logic l] or
DTS NEO:6 is on.
eThis sound effect have no effect when receiving AM radio broadcast.
Using Whisper-mode Surround (W. S.)
You can enhance the surround effect for low volume 5.1-channel
sound. (Convenient for late night viewing.)
O Press [A, T] to select "ON" or "OFF".
oThis function is effective when playing audio containing surround
channel sound or when Dolby Pro Logic Ilx/Dolby Pro Logic 11or
DTS NEO:6 is on.
oThis sound effect have no effect when receiving AM radio broadcast.
You can select sound quality settings.
O Press [A, T] to select the item.
Each time you press the button:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
Enhancing the bass sound (H.BASS)
You can enhance low-frequency sound so that heavy bass sound can
be heard clearly.
O Press [A, y] to select "ON" or "OFF".
You can make the sound of the center speaker seem like it is coming
from within the TV.
O Press [A, T] to select "ON" or "OFF".
oThis function is effective when playing audio containing center
channel sound or when Dolby Pro Logic ]lx/Dolby Pro Logic ]1 or
DTS NEO:6 is on.
Adjusting the subwoofer level (SW. LEVEL)
You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playback source.
O Press [A, T] to select the item.
SUB W 1: Weakest effect
SUB W 2: Middle effect
SUB W 3: Strongest effect
O
Adjusting speaker level during play
Press [CH SELECT] to select the speaker.
Each time you press the button:
L R_ C_ RS_ RB_ LB_ LS_ SW
L R: Front speaker (left and right)
C: Center speaker
RS: Surround speaker (right)
RB: Surround back speaker (right)
LB: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
oSpeakers with settings (_ 34) set to" "will not be displayed.
oThe channels not included in the playing audio will not be
displayed (Subwoofer is displayed even if not included).
Adjusting the balance of the front speakers
(When "L R" selected)
0 Press [<1, I_] to adjust the balance of the front
speakers,
e.g.,
Standard balance
Front right: --11 to --12 dB
(When other option selected)
O Press [A] (increase) or [,] (decrease) to adjust
the speaker level for each speaker.
C, SW: +6 dB to --6 dB
RS, RB, LB, LS: +10 dB to --10 dB
e.g., Subwoofer
RQT9129