Table of Contents
Advertisement
Battery installation
R USE ONLY Ni-MH batteries AAA
(R03) size.
R Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
R Confirm correct polarities (
Rechargeable Ni-MH ONLY
R When the region setting is
displayed, see page 38.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
the charge indicator goes off and
"Fully charged" is displayed.
Confirm "Charging" is displayed.
Charge indicator
Note when setting up
Note for connections
R The AC adaptor must remain
connected at all times. (It is normal for
,
).
the adaptor to feel warm during use.)
R The AC adaptor should be connected
to a vertically oriented or
floor-mounted AC outlet. Do not
connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
R The unit is not designed to be used
with rotary/pulse dialling services.
R The unit's answering system will not
answer incoming calls on your
FaxAbility number. (for New Zealand)
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line socket using a
telephone double adaptor (for Australia)/
a BT double adaptor (for New Zealand).
Note for battery installation
R Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on
page 5, 6.
R Wipe the battery ends (
dry cloth.
R Avoid touching the battery ends (
Note for battery charging
R It is normal for the handset to feel
warm during charging.
R Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month.
Getting Started
) or the unit contacts.
,
) with a
,
11
Advertisement
Table of Contents
