Note When Setting Up; Intelligent Eco Mode - Panasonic KX-TG4012C Operating Instructions Manual

TG401xC(e).book Page 10 Thursday, January 14, 2010 1:29 PM
Getting Started

Note when setting up

Note for connections
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a T-
adaptor.
Note for battery installation
L Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on page
4, 7.
L Wipe the battery ends (S, T) with a
dry cloth.
L Avoid touching the battery ends (S,
T) or the unit contacts.
Note for battery charge
L It is normal for the handset to feel
warm during charging.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
10
Battery level
Icon Battery level
High
5
Medium
6
Low
7
Needs charging.
074
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous 13 hours max.
use
Not in use 6 days max.
(standby)
*1 If Eco mode is on.
Note:
L Actual battery performance depends
on usage and ambient environment.
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.

Intelligent eco mode

This feature automatically reduces
handset power consumption by
suppressing handset transmission
power when the handset is close to the
base unit.
L When this feature is activated, "ECO"
is displayed.
L Eco mode is turned off when the
clarity booster is activated (page 16).
*1
*1