Table of Contents
Advertisement
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is
displayed or announced
late.
Cause/solution
R You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
R If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line socket, plug the unit
directly into the wall socket.
R If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base
unit and the telephone line socket. Contact your
DSL/ADSL provider for details. (for Australia)
R If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL
service provider to have a DSL/ADSL Splitter
installed. We do not recommend the use of
generic DSL/ADSL filters. Contact your DSL/ADSL
service provider for details. (for New Zealand)
R Other telephone equipment may be interfering with
this unit. Disconnect the other equipment and try
again. (for Australia)
R Other telephone equipment such as a monitored
Burglar Alarm or the modem in the SKY Digital
decoder may be interfering with this unit.
Disconnect the other equipment and try again. (for
New Zealand)
R Depending on your service provider/telephone
company, the unit may display or announce the
caller's information at the 2nd ring or later.
R Move closer to the base unit.
Useful Information
65
Advertisement
Table of Contents
