Menu Option Descriptions - Viper 5901 Owner's Manual

Feature
On
Button press
beep
System type Remote start
& Security
Clock set Clock time

➢ Menu option descriptions

• Auto keypad lock
Automatically locks the remote buttons when the buttons are not used for
60 seconds. Prevents "accidental" presses of the remote.
Press then
Note: If the auto keypad lock feature is programmed On, the remote auto-
matically unlocks when the vehicle ignition is turned Off. The remote stays
unlocked to allow time to exit and unload the vehicle, and then lock the
doors with the remote. When the
lock feature resumes normally.
• Page On or Off and Power save
When paging is "On" the remote checks the status of the system every
four seconds, and reports any alarm triggers (if the system is within the
operating range).
In the paging "Off" setting, the remote does not check the status of the
system. In the paging Off mode the remote will only beep and report when
a button on the remote is pressed.
In the "battery saver" mode, the remote goes into sleep mode if no buttons
are pushed for 72 hours. The timer resets each time a button is pressed.
• Page Alert / Vibe/Beep Tone/Both or /Screen only
Receive command confirmations on the remote with vibrations, beeps or
both, or with display only.
© 2008 Directed Electronics. All rights reserved.
Opt 1 Opt 2
Off
Remote start
Back
AUX
to unlock the keypad.
A U X
Opt 3
back
Back
button is pressed, the keypad auto
X
A U
Opt 4 Opt 5
37