Method 3: Via The Wps Button - TP-Link RE230 User Manual

Hide thumbs Also See for RE230:

Table of Contents

Chapter 2

Tip:

If you connect the extender to a TP-Link OneMesh router and a success screen as below appears at the end of the

setup, the extender has successfully joined the router's OneMesh network and copied the router's wireless settings.

For more information, refer to

2 2 3

Method 3: Via the WPS Button

Use this way if your router has a WPS button. The button might look like one of these:

1. Press the WPS button on your host router, and then press the WPS button on the

extender for 1 second within 2 minutes.

Note:

For more information about using WPS button on your host router, please refer to the router manufacturer's user

guide.

OneMesh with Seamless

Roaming.

Set Up Internet Connection

Table of Contents