Saving Colour Copies - Ricoh Aficio MP C2000 Operating Instructions Manual

Appendix
❒ Depending on the ambient temperature and humidity, steam may come from
the exhaust vent behind the control panel during printing. This is water va-
pour from the paper, not a sign of malfunction.
❒ If condensation forms inside the machine as a result of temperature change,
the machine may not print properly. To minimize this problem, use the op-
tional anti-condensation heaters.
❒ Be sure to make a note of the registered machine settings in case they are lost
due to accident or malfunction.
Reference
p.26 "Turning Off the Power"
3
p.27 "Turning Off the Main Power"

Saving Colour Copies

Followings are notes on saving colour copies.
• There is no difference between colour prints and colour copies in terms of fad-
ing. However, for long-term storage, make sure to store them in a binder
away from direct sunlight.
• Toner may melt if a print and a half-dried print are put on top of each other.
• Toner may also melt when using solvent type adhesive agents for pasting
prints.
• When folding prints, toner in the folds will come off.
• Toner may melt if it is placed on mats made of chlorinated plastic in locations
of high temperature for long periods of time.
• Toner may melt if prints are placed in places of extremely high temperatures,
such as near heaters.
34