❒ If the "Temperature Alert" message appears, check the installation site. For
details, see "Machine Environment", Troubleshooting.
❒ If you have inadvertently set "Set Date" to a date in the future, the machine
may take longer than usual to start printing or to initialize after being
switched on. If this is the case, do not switch the machine off; instead, wait
about 10 minutes.
Turning On the Power
Turn on the power as follows:
A
Press the Operation switch. The On indicator goes on.
Note
❒ If the power does not come on when the Operation switch is pressed, check
the main power switch is on. If it is off, turn it on.
Turning Off the Power
Turn off the power as follows:
A
Make sure the exposure glass cover, ADF or ARDF are lowered.
B
Press the Operation switch. The On indicator goes off.
AMA004S
AMA004S
Turning On the Power
23
1