Ricoh Aficio MP171 Field Service Manual page 190

3. Appendices: SP Mode Tables
1-105-001 C: Plain1
1-105-003 C: Plain2
1-105-005 C: Thick1
1-105-007 C: Thick2
1-105-011 C: Thin
1-105-013 C: Envelope
1-105-015 C: Card
1-105-017 C: Transparency
1-105-019 C: Special
1-105-023 C:Middle Thick
1-105-025 C:Thick1(LowTemp)
1-105-031 FuserOffMode
1105 [Curl Dec Mode]
1-105-021 Mode Display
1-105-022 PreprtRotTime
[Fusing Temp Disp]
1106
This SP displays the hot roller and pressure roller temperatures.
1-106-001 RollerCenter
22
E [140 to 205 / 167 / 1deg/step]
E [140 to 205 / 174 / 1deg/step]
E [140 to 205 / 180 / 1deg/step]
E [140 to 205 / 190 / 1deg/step]
E [140 to 205 / 160 / 1deg/step]
E [140 to 205 / 205 / 1deg/step]
E [140 to 205 / 190 / 1deg/step]
E [140 to 205 / 165 / 1deg/step]
E [140 to 205 / 180 / 1deg/step]
E [140 to 205 / 177 / 1deg/step]
E [140 to 205 / 185 / 1deg/step]
[0 or 1 / 1 / 1/step]
E
The switch that turns the fuser off after the idle
process runs over 30 minutes.
[0 or 1 / 0 / 1 /step]
E
Enables or disables the CurlDecMode (0:
Disabled, 1: Enabled)
[500 to 60000 / 20000 / 500msec/step]
E
Sets the pre-print rotation time for reducing
curls.
[-20 to 250 / 0 / 1deg/step]
E
Displays the current fusing thermistor
temperature (Center).