Table of Contents
Advertisement
34) Remove the overflow cap, overflow pipe, and drain plug. After the water tank has
drained, replace the drain plug, overflow pipe, overflow cap, cube guide A, and cube
guide B, and reconnect the distributor to the distribution hose, then replace the
insulation, left side, and top panels
35) Clean the dispenser unit/ice storage bin liner using a neutral cleaner. Rinse thoroughly
after cleaning.
36) Turn the cleaning valve to the right until completely horizontal (closed). Move the control
switch to the "ICE" position. Note: If on a dispenser unit, turn on the dispenser unit
power supply.
37) Replace all panels in their correct positions.
31
Advertisement
Table of Contents
