Hoshizaki SRK-8H Instruction Manual page 22

1. Icemaker
Icemaker Water Minimum Icemaker
Supply Inlet Water Supply Line Size
1/2" Female Pipe 1/4" Nominal ID
Thread (FPT) Copper Water Tubing or
Equivalent
• An icemaker water supply line shut-off valve and drain valve must be installed.
• Be sure there is sufficient extra water supply line and drain line for the appliance to be
pulled out for service.
Icemaker Drain
Outlet 3/4" FPT
Icemaker Water
Supply Inlet
1/2" FPT
Icemaker
Ice
Storage
Bin
Bin Drain Outlet
3/4" FPT
Minimum 3/4" Nominal ID Hard Pipe
KMS-830MLH
Fig. 12
Icemaker Drain Minimum Icemaker
Outlet Drain Line Size
3/4" Female Pipe 3/4" Nominal
Thread (FPT) ID Hard Pipe or
Equivalent
Vent Tube
Icemaker Condensation
Drain Outlet
3/8" OD Hard Tube
Icemaker Water Supply
Line Shut-Off Valve
Icemaker Water Supply
Line Drain Valve
Vent Tube
Separate piping to approved
drain. Leave a 2-inch (5-cm)
vertical air gap between the
end of each pipe and the drain.
22
Minimum 1/4" Nominal ID
Copper Water Tubing
2-inch
(5-cm)
air gap
Floor
Drain