Table of Contents
Advertisement
Selecting a Drive Mode
You can switch the operation to be performed when you press the shutter
button.
1
Press [
2
Press
to select the drive mode and press [MENU/SET]
[Single]
[Burst] (→52)
[Auto Bracket]
(→53)
[Aspect Bracket]
(→53)
[Self Timer] (→54)
[Panorama
∗
Shot]
(→54)
∗
Cannot be set when using [Intelligent Auto] Mode.
• The icons in the above table are just examples.
• To cancel drive mode, select [
switched to "Single".
• When you press
Note, however, that you cannot change the settings of [Single] and
[Aspect Bracket].
] button ( )
When the shutter button is pressed, only one
picture is recorded.
The pictures are recorded in succession while
the shutter button is pressed.
Each time the shutter button is pressed, the
∗
pictures are recorded with different exposure
settings based on the Exposure Compensation
range.
When the shutter button is pressed, 4 pictures
∗
with 4 different aspect ratios are automatically
recorded.
When the shutter button is pressed, recording
takes place after the set time has elapsed.
The pictures are recorded in succession while
you press the shutter button and move the
camera horizontally or vertically, and then the
camera combines the pictures into a single
panorama picture.
, you can change the settings of each drive mode.
Advanced Recording Functions
] ([Single]) or [
]. The recording is
SQT0832 (ENG)
51
Advertisement
Table of Contents
