Changing Settings Using The Control Ring - Panasonic LUMIX DMC-LX100SG Basic Operating Instructions Manual

Basics

Changing settings using the control ring

You can use the control ring to change the settings of the unit.
Items that can be set by the control ring vary depending
on recording modes.
Following are the pre-assigned settings.
Recording mode
[Intelligent Auto] Mode
[Program AE] Mode
[Aperture-Priority] Mode
[Shutter-Priority] Mode
[Manual Exposure] Mode
∗
You can use the control ring to change the following settings values, which
cannot be set using the shutter speed dial.
• Higher speed than 1/4000 seconds (electronic shutter (→50))
• Slower speed than 1 second (mechanical shutter (→50))
• Setting in 1/3 EV steps
●
The control ring is assigned to selecting the picture effect (Filter) when you
are recording a panorama picture. (→55)
●
When Manual Focus is set, focus adjustment is assigned to the control ring.
(→46)
22
SQT0832 (ENG)
Setting
Step Zoom (→57)
Step Zoom (→57)
Step Zoom (→57)
Shutter speed adjustment
(→31, 32)
Shutter speed adjustment
∗
∗
(→32)