Selecting A Drive Mode ([Burst] / [Self Timer]) - Panasonic Lumix DC-FZ1000 II Basic Owner's Manual

Selecting a Drive Mode
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Rotating the drive mode dial
[Single]
[Burst]
[4K PHOTO] (→42) /
[Self Timer]
Burst function
■
Setting [Burst Rate]
→ [Rec] → [Burst Rate]
Speed (pictures/sec.)
Live View during
burst recording
Number of
recordable pictures
Taking pictures with self-timer
■
Setting the self-timer operation
→ [Rec] → [Self Timer]
The shutter is activated after 10 seconds.
The shutter is activated after 10 seconds and three pictures are taken at intervals of
approximately 2 seconds.
The shutter is activated after 2 seconds.
When the shutter button is pressed, only one picture is recorded.
The pictures are recorded in succession while the shutter button is
pressed.
[Post Focus] (→45) /
When the shutter button is pressed, recording takes place after the set
time has elapsed.
[AFS] / [MF]
[AFF] / [AFC]
[AFS] / [MF]
[AFF] / [AFC]
With RAW files
Without RAW files
([Burst] / [Self Timer])
[Time Lapse/Animation] (→47)
[H] (High speed)
12
7
None
Available
[M] (Middle
[L] (Low speed)
speed)
7
Available Available
26 or more
100 or more
DVQX1774 (ENG)
Recording
2
41