Table of Contents
Advertisement
The Wi-Fi connection is not recognising my PC.
• By default, the Wi-Fi connection uses the default workgroup name of
"WORKGROUP". If the name of the workgroup has been changed, it will not
be recognised.
→ Select [PC Connection] then [Change Workgroup Name] in the [Wi-Fi
Setup] to change the workgroup name to match that of your PC.
Transmission of the image fails midway. There is an image that could not
be transmitted.
• Image cannot be transmitted when the battery indicator is flashing red.
• Is the size of the image too large?
→ Divide the motion picture using [Video Divide].
→ Reduce the image size at [Size], and then send.
• File format of the picture that can be sent differs depending on the
destination.
Sometimes focus adjustment with Auto Focus mode is difficult while
recording 4K motion pictures.
• This may occur when taking a picture by reducing the Auto Focus speed in
order to adjust the focus at high precision. This is not a malfunction.
Others
89
SQT0832 (ENG)
Advertisement
Table of Contents
