Installing Ricoh Pj Interactive Software - Ricoh PJ WX4152NI Operating Instructions Manual

6. Using the Interactive Function (RICOH PJ WX4152NI only)
6. Point the pen nib toward the projected screen.
• If registration succeeds
The projected computer screen pointer moves according to the movements of the electronic
pen. Also, the communication indicator on the electronic pen lights up or flickers green rapidly
and the computer USB adapter lights up.
• If registration fails
• Check how you are holding the electronic pen. If you are holding the top or the bottom
of the pen, the projector is unable to recognize the electronic pen correctly. To hold the
electronic pen correctly, see page 94 "How to Use the Electronic Pen".
• Check that the pen nib is not pointing at a shadow. If the pen nib is pointing at a shadow
or if it is not pointing at the screen, then the projector is unable to recognize the
electronic pen correctly. To operate the electronic pen correctly, see page 94 "How to
Use the Electronic Pen".
• If the electronic pen is not recognized correctly after the direction of the pen is corrected
or even when you hold the electronic pen correctly, check the procedure from Step 1 by
referring to page 99 "When You Cannot Use the Interactive Function".

Installing RICOH PJ Interactive Software

RICOH PJ Interactive Software allows you to write and draw on a projection screen. When you use
RICOH PJ Interactive Software, install it on a computer. For details about how to use RICOH PJ
Interactive Software, see Operating Instructions (Interactive Function).
The following operating environment is required to use RICOH PJ Interactive Software.
Item
CPU
90
CZE028
® TM
• Intel Core 2 Duo 2 GHz or more recommended
(Minimum: Intel Core Solo U1300)
Specifications