Connecting Av Equipment - Ricoh PJ WX4152NI Operating Instructions Manual

1. Preparations for Using the Projector

Connecting AV Equipment

Use a cable that supports the signal being input when connecting AV equipment.
Connecting to the HDMI port
Connect an HDMI cable to the HDMI ports of the projector and the AV equipment.
• Some devices may not operate properly when connected using HDMI.
• Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed
HDMI cable. A conventional HDMI cable may not work properly.
Connecting to the video out port
Connect a video cable to the Video In port of the projector and to the video out port of AV equipment.
To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the
projector and to the audio out port of AV equipment.
Connecting to the Y/Pb/Pr out port
Connect a D-sub to component video cable to the Computer In port of the projector and to the Y/Pb/Pr
out port of the AV equipment. To output audio from the speaker on the projector, connect an audio
cable to the Audio In port of the projector and to the audio out port of AV equipment.
32
CZE116
CZE117
CZE118