Projecting Images From A Usb Memory Device Or Digital Camera; Requirements For Projecting Images From A Usb Device - Ricoh PJ WX4152NI Operating Instructions Manual

3. Projecting Images from a USB
Memory Device or Digital Camera
This chapter explains how to project images from a USB memory device or digital camera.
Requirements for Projecting Images from a
USB Device
• It is recommended to back up the data saved to a USB device before using it. The manufacturer is
not responsible for any damage due to the loss of data.
• Do not disconnect the power plug while the USB device is being accessed. Doing so may cause
malfunction or data loss.
• The USB devices must support USB 2.0.
• The projector supports FAT16 or FAT32 format USB devices. Other forms of USB device are not
compatible.
The projector can project still images and videos stored on a USB memory device or a digital camera.
The following still images and videos are supported by the projector:
Still images
Item
File extensions
File size
Number of pixels
JPEG format
Videos
Item
File extensions
File size
Number of pixels
jpg, jpeg, JPG, JPEG
Less than 10 MB
2 × 2 to 5120 × 5120 pixels
Baseline format
mpg, mpeg, MPG, MPEG, m2ts, m2t, M2TS, M2T, m2p, M2P,
mp4, MP4, mov, MOV
Less than 2 GB (FAT16) or 4 GB (FAT32)
320 × 240 to 1920 × 1080 pixels
Requirements
Requirements
47