Dcs - ZyXEL Communications NWA1123 Series User Manual

The second response your AP can take is to kick the connections that are pushing it over its balanced
bandwidth allotment.
Figure 48 Kicking a Connection
Connections are kicked based on either idle timeout or signal strength. The NWA1123 first looks to see
which devices have been idle the longest, then starts kicking them in order of highest idle time. If no
connections are idle, the next criteria the NWA1123 analyzes is signal strength. Devices with the weakest
signal strength are kicked first.

8.5 DCS

Use this screen to configure dynamic radio channel selection. Click Configuration > Wireless > DCS to
access this screen.
Figure 49 Configuration > Wireless > DCS
Each field is described in the following table.
Table 32 Configuration > Wireless > DCS
LABEL
Select Now
Apply
Reset
Chapter 8 Wireless
DESCRIPTION
Click this to have the NWA1123 scan for and select an available channel immediately.
Click Apply to save your changes back to the NWA1123.
Click Reset to return the screen to its last-saved settings.
NWA1123 Series User's Guide
78