Using A Tv Screen To Shoot Snapshots - Casio Exilim EX-ZR3500 User Manual

Using a TV Screen to Shoot Snapshots (HDMI TV Output)
Use the procedure below to configure the camera for shooting snapshots with an
aspect ratio of 16:9, as you compose them on a TV screen.
1.
Turn off the camera and use a commercially available HDMI cable to
connect the camera to a TV.
• Use a commercially available HDMI
cable that is marked with the logo
shown to the right.
• Make sure that the camera is turned
off before plugging in or unplugging
the cable. Check the user documentation that comes with the TV for
information about requirements before plugging into or unplugging from the TV.
HDMI output (micro)
HDMI micro connector
2.
Turn on the camera.
3.
In the BEST SHOT Mode, select "HDMI TV Output" (page 86).
This will turn off the camera's monitor screen and display an image composition
screen on the connected TV.
4.
Compose the image on the TV screen and press the shutter button to
shoot.
HDMI connector
HDMI input
HDMI cable
(commercially
available)
99
TV
Using BEST SHOT