Temporarily Holding On A System; Holding On A Channel; Quickly Storing An Id During Id Search; Quick-Storing Channels Or Talk Group Id's - Uniden BCD396T Owner's Manual

• ID Scan – the scanner only stops on talk group
ID's that you have programmed into the system
• ID Search – the scanner stops on any unlocked
talk group that becomes active.
To toggle between ID Scan and ID Search, press
Scan while the scanner is scanning the system.

Temporarily Holding On a System

To temporarily hold on a system, press and hold
To hold on a different system, continue to hold
and rotate the scroll control to select the system.
Normal scanning resumes 2 seconds after you release
.
Func

Holding On a Channel

To hold on a channel, press Hold while the channel is
active. To select a different channel, rotate the scroll
control. If you scroll past the beginning or end of the
current system, the scanner selects channels in the
previous or next system. To resume scanning, press
Scan.
Quickly Storing an ID During ID
Search
To quickly store an active talk group ID during ID
search, press E. You see:
Quick TGID Save?
To save the ID into a channel, press E. Otherwise,
press No. If you press E, the scanner stores the ID
into a channel group called Qck Save Grp in the
current system.
Quick-Storing Channels or
Talk Group ID's
1. Hold on an existing channel in any system.
2. Enter the frequency or talk group ID you want to
store (press
ID's).
twice to enter hyphens in talk group
Basic Operation
.
Func
Func
47