Turning Weather Alert On/Off - Uniden BCD396T Owner's Manual

Scanning radio
Hide thumbs Also See for BCD396T:
Table of Contents

Advertisement

• Set Tone Lets you set the tone-out type.
Edit Tone A - Enter the frequency (in Hz) for
Tone A
Edit Duration A - Enter the duration (in ns)
for Duration A. 500 ns is the default.
Edit Tone B - Enter the frequency (in Hz) for
Tone B
Edit Duration B - Enter the duration (in ns)
for Duration B. 500 ns is the default.
Tone Gap - Enter the tone gap (in ns). 100 ns
is the default.
Set Delay Time Enter a value from 1-5 or Off,
then press the scroll control.
Set Alert Enter a value from 1-9 or Off, then press
the scroll control.

Turning Weather Alert On/Off

In weather alert mode, your scanner functions as a
severe weather warning radio. This is especially useful
when your area is expecting severe weather
conditions late at night. When you set the scanner to
weather alert mode, it holds on the weather channel,
but does not play the channel's audio. If it detects a
weather alert, it sounds a tone, displays information
about the weather alert, and turns on the audio so you
can hear the weather broadcast.
Menu
Weather Alert
This setting determines which types of signals will
trigger an alert. Select your setting, then press the
scroll control.
Alert Only - the scanner alerts when it detects the
1050 Hz tone that accompanies all weather alerts.
112
WX Operation
Using Weather Alert (SAME)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents